1. Specifications and other information of L3++ are as mentioned below.
2. To ensure that more buyers around the world can purchase miners in this batch, we have set a limit of 100 miners per customer.
3.The shipping for this batch will start on a first-paid-first-ship basis for orders that Bitmain has received full payment for. We advise you to research and prepare in advance for customs' clearance in your country to avoid delays or unexpected costs.
4. For Germany shipments, please be aware about we have numbers of German customers met custom clearance problems when shipments arrange via DHL. You may wish to consider this piece of information before choosing shipping carrier. In the case of any custom delay or shipment return due to DHL shipping, Bitmain will not be held liable.
5.For Germany shipments, please be aware about we have numbers of German customers met custom clearance problems when shipments arrange via DHL. You may wish to consider this piece of information before choosing shipping carrier. In the case of any custom delay or shipment return due to DHL shipping, Bitmain will not be held liable.
6.Please select the correct address and shipping method for shipping before you submit your order because, for this batch, the shipping address and shipping method cannot be changed after the order has been submitted.
7. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
8. You will need an ATX PSU with at least 9 six-pin PCIE connectors. There are 2 PCI-e connectors for +12V DC input on each hashing board and both need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. Bitmain recommends the APW3++ to power the L3++
9. The power cord is not included, please find one with at least 10A from your local market.
Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 9 PCIE connectors are connected to power supply.
10. Please click here to refer to the all certificates of the products.Please research on your local custom requirements before purchasing from Bitmain. In the case of any custom delay or shipment return due to the lack of certification, Bitmain will not be held liable.
12. If delivery to US,according to the NY ruling N297495 ,mining machine might be classified under 8543.70.9960 which contain with 2.6% of the import duty and tax plus additional 25% of the import duty due to country of origin made in China.
Parameters of ANTMINER L3++
Total quantity of hash chips
Total quantity of hash boards
Total hash rate
DC voltage input
DC current input @12V DC input
DC Power @12V DC input
220VAC Power @25℃ ,93%
conversion efficiency of APW3
220VAC Power efficiency @25℃
,93% conversion efficiency of APW3
1.62 J/MH +10%
Networking connection mode
Power connection mode
All two PCI-E ports are required to power the board. You can use one PSU to power multiple boards, but do not attempt to power one board with two PSUs.We suggest to prevent the control board to be powered up before hash boards be powered up.
1. A 180-day warranty is provided starting from the shipping date. To avail this warranty a repair ticket must be generated by the customer on Bitmain's website. Overclocking the miner will void the warranty immediately.
2. The warranty only applies to the original purchaser who purchased the machine directly from Bitmain. Once the miner is resold warranty coverage becomes the responsibility of the re-seller.
3. All sales are final. No refunds will be granted. Defective miners can be repaired for free if they fall under the Bitmain warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.
4. The following events will void the warranty:
a. Customer removes/replaces any components by himself without receiving permission from Bitmain first;
b. Damage caused by poor power supply, lightning or voltage surges;
c. Burnt parts on hash boards or chips;
d. Miner/boards/components damage due to water immersion or corrosion due to wet environment.
5. For all repairs or RMA, within warranty or not, customer must return the defective parts at his/her own expense after opening a support ticket and troubleshooting with Bitmain's instructions.
6. Bitmain will cover shipping cost when shipping a replacement unit within the warranty period.
7. Bitmain does not take any responsibility for or compensate for any loss as result of downtime caused by delays in transportation as a result of custom formalities or other reasons.
A:Asic miner brand for Antminer, iBeLink, Baikal, INNOSILICON, etc. and graphic card brand for Colorful,Zotac,Maxsun etc.
2-Q: Our Advantage:
A:Any inquiries will be replied within 1 hour ,before we send out the goods,we check them more than three times strictly,
B.We can give customer assistance for custom clearance to save cost, and we can offer cheap logistic cost
to the world countries.
3-Q: Payment ways:
A:We accept TT Bank transfer , West Union escrow, Crypto coin such as BTC BCH LTC or ETH, trade Inssurance need 5% extra cost and etc.
A:Stock for 1-3 work days delievery time after confirmed Payment.
5-Q: Shipping Ways:
A:We ship worldwide via UPS/DHL/FEDEX/TNT(3-5 days), EMS(5-10days) if need other kind ship terms
PLS contact with us for help.
6-Q: What is the warranty?
A:180-day warranty is provided starting from the shipping date.
7-Q: Where is your company Located? How can I visit there?
A: We are located in Shenzhen center City, Guangdong Province,China. you can take a plane to HK
airport or Shenzhen Airport.
Due to the miner machines are investment product,please be noted :
1.No refund,No goods return back after paid.
2.The Miner Machine have 180days warranty and guarantee period.
3.Because Market price instability factor,the product price maybe will change in anytime, so we will not infor each day and will asking increased price in order place time.The final price only after received order 100% payment then confirm.
Warranty failure: 100% best after-saled services......
1. The Miner Without authorization to disassembly Machine/Without authorization to change or Replacement device.
2. Lightning stroke/Voltage surge/Damage caused by inferior power supply.
3. Inflow water,Damage caused by damp and corrosion of circuit boards and components.
4. The circuit boards burned or burned.
5. Over Clock.
Please contact with us as soon as possbile if you get the thing happened above.We will help you to solution within short time and tell our service center the location nearly you.
Sales Manager: Jessica
Mobile/Wechat: +86 13802318133
Whatsapp: +86 15018235267