深圳市金灵蚁科技有限责任公司
Shenzhen Bit-king Technology co., LTD

电话/微信:13802318133
产品详情
蚂蚁矿机S9 14.5T带官电
蚂蚁矿机S9 14.5T带官电
产品详情
价格(元): 3500-3800 品牌: 蚂蚁矿机

产品介绍



蚂蚁矿机 S9i 规格参数:
1.额定算力:13.5TH / s±5%
2.墙上功耗:1310W+10%(比特大陆APW3-1600瓦电源,AC / DC 93%的效率,25℃环境温度)
3.电源效率:97J/TH + 10%(墙上,AC / DC 93%的效率,25°C的环境温度)
4.额定电压:11.6~13.0V
5.外箱尺寸:445毫米(L)*215毫米(W)*255毫米(H)
6.冷却:2×12038风扇
7.工作温度:0℃至40℃
8.工作湿度:5%RH-95%RH,非凝露
9.网络连接:以太网

10.噪音:76dB

11.整机重量(不包含包装):4.2kg
12.电源连接方式:每块算力板三个PCIE接口都需要连接,推荐使用独立电源给整机供电,非独立电源情况下,3个算力板可以分别连接到不同的电源,但是每块算力板不能连接多个电源,并保证算力板最后通电。


Parameters of ANTMINER S9i-13.5

NO.

Parameters

Value

1

Product model

S9i-13.5

2

Total quantity of hash chips

189 PCS

3

Total quantity of hash boards

3 PCS

4

Total hash rate

13.50 TH/s

5

DC voltage input

11.60~13.00 V

6

DC current input @12V DC input

101.5 A +10%

7

DC Power @12V DC input

1218 W +10%


8

220VAC Power @25℃ ,93%

conversion efficiency of APW3


1310 W +10%


9

220VAC Power efficiency @25℃

,93% conversion efficiency of


97 J/TH +10%

10

Weight(without package)

4.2 kg

11

Operation temperature

0-40 ℃

12

Storage temperature

-40-85 ℃

13

Operation humidity

5%RH-95%RH,prevent condensation

14

Noise

76 dB

15

Networking connection mode

Ethernet Cable

16

Power connection mode

All three PCI-E ports are required to power the board. You can use one PSU

to power multiple boards, but do not attempt to power one board with two PSUs.

We suggest to prevent the control board to be powered up before hash boards

be powered up.

17

Size (Length*Width*Hight)

350mm*135mm*158mm


注意事项:

1.机箱变形或者散热片脱落,请不要通电,联系售后处理。

2.不能使用两个电源带同一个算力板。


售后政策Warranty

矿机不同于消费类电子产品,而是根据顾客需求特殊定制的、用于投资的产品,投资需谨慎。本产品售后服务政策如下,一旦购买,即视为对本政策的认同。

1. 无论是否发货,付款后均不能退款、退货。
2. 矿机产品的保修期为自发货之日起180天。
3. 由于市场波动,在您购买后,产品价格可能会随时调整。我们不承担事先通知、价格补偿的义务。

以下情况会使保修失效:

1.矿机本身被拆卸,私自改动、更换元器件;
2.雷击,电压浪涌,劣质电源等造成的损坏;
3.进水、电路板和元器件受潮、出现腐蚀造成的损坏;
4.电路板存在烧毁痕迹的或者芯片被烧毁的;
5.超频。

如果发生了以上情况,BITMAIN官方为您矿机提供收费维修服务。具体流程请参考官网的售后流程。


1. A 180-day warranty is provided starting from the shipping date. To avail this warranty a repair ticket must be generated by the customer on Bitmain's website. Overclocking the miner will void the warranty immediately.

2. The warranty only applies to the original purchaser who purchased the machine directly from Bitmain. Once the miner is resold warranty coverage becomes the responsibility of the re-seller.

3. All sales are final. No refunds will be granted. Defective miners can be repaired for free if they fall under the Bitmain warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.

4. The following events will void the warranty:

   a. Customer removes/replaces any components by himself without receiving permission from Bitmain first;

   b. Damage caused by poor power supply, lightning or voltage surges;

   c. Burnt parts on hash boards or chips;

   d. Miner/boards/components damage due to water immersion or corrosion due to wet environment.

5. For all repairs or RMA, within warranty or not, customer must return the defective parts at his/her own expense after opening a support ticket and troubleshooting with Bitmain's instructions.

6. Bitmain will cover shipping cost when shipping a replacement unit within the warranty period.

7. If you notice there are some loose heatsinks when you receive the miner, please inform us by email to info@bitmaintech.com within 3 days from the date the package is received according to UPS/DHL/FEDEX's website.

8. Bitmain does not take any responsibility for or compensate for any loss as result of downtime caused by delays in transportation as a result of custom formalities or other reasons.

Please read Bitmain’s Terms & Conditions for a complete list of conditions and terms that apply to all orders placed on Bitmain.com